Specs
Laser Lens Kit specs
Setup notes and briefing numbers for Laser Lens Kit.
Lens diameters and fitment points
Laser Lens Kit specs lists the lens kit details needed before ordering for an Eagle Studio CO₂ laser. Check fitment and part information against your current machine.
Confirm the lens diameter, focal length, nozzle arrangement, and retaining hardware on the current head. Cape workshops cutting acrylic, MDF, board and stamp rubber often need different lens choices depending on edge finish and cutting height.
Take a clear photo of the lens tube, nozzle and any markings on the removed lens before comparing parts. A quick check of soot build-up, chipped edges and thread condition helps identify whether the issue is only the lens or the full consumable stack. In Somerset West and other coastal areas, residue and moisture can shorten cleaning intervals if the air path is not kept dry.
What to verify before ordering
Match the listed kit details to the machine in front of you, not only the model name on an old invoice. Lens size, focal length and mount style must all line up with the head assembly to keep the beam centred through the nozzle. Incorrect fitment can show up as flare marks, poor penetration, or a wider kerf on thin acrylic and plywood.
Use this sheet together with your machine photos and current part measurements when reviewing replacement items. Tell the Somerset West team the material and sheet size you plan to cut, and we will match a router, CO₂ laser or profile cell.
- Lens diameter checked on current head
- Focal length matched to cutting work
- Holder, nozzle and ring photos attached
Workshop conditions affecting lens life
Fine MDF dust, acrylic vapour and smoke residue all change how often a lens needs inspection and cleaning. Machines running daily production in Cape Town, Somerset West, Johannesburg or Durban may show different wear patterns depending on extraction quality and material mix. Note whether the machine is mainly engraving, vector cutting, or switching between both.
Coastal humidity can leave optics and mounts needing more frequent checks, especially if the machine stands idle between jobs. Inland dust can settle through the beam path and around the nozzle, which affects consistency on repeat work. After power interruptions, inspect alignment and run a small test cut before resuming a long batch.
Operated by Astros Marketing (Pty) Ltd from 2 Makro Place, Sunnyrock 1401.
Details to send with your enquiry
Provide the machine model, the existing lens measurements, and what material is being cut most often. Add photos of the lens seat, nozzle tip and any damage on the removed optic.
Keep a record of the current setup, the tested material thickness and the result seen on sample cuts. That note helps when comparing a worn lens against a replacement specification or checking whether another part in the optical path needs attention.
What our CNC and Laser customers say
Verified Google reviews